 |
 |
|
Drum Chocks - Eliminate the need for expensive specialty racks and stands to store
your drums horizontally. Now with the drum chock you can store your
drums horizontally on standard pallet racks or on wooden pallets. The
chock eliminates rolling while drums are stored on their side. Models are
also available to tilt drums forward for better drainage from standard
faucets. Front stops are included on tilted models to eliminate drum side
off. Constructed of recycled polyethylene.
Drums not included.
|
|
|
|
|
 |
|
Drum Dollies - Transport ordinary or specialty styled drums easily with this multipurpose drum dolly.
1000 lbs. capacity
Hard rubber casters
|
|
|
|
|
 |
|
Plastic Drum Pallet & Low Profile Spill Decks - Plastic Drum Pallet #VE-DRUM-4848
Constructed from 100% polyethylene
Move drums from workstation to workstation with a fork truck or pallet truck
Holds (4) 55 gallon drums
4-way fork entry, reversible and holes for drainage
Low Profile Spill Decks:
Designed to catch spills
VE-VLPDP-2448 (not shown) has a volume capacity of 9 gallons
VE-VLPDP-4448 has an 18 gallon volume capacity
Manufactured from chemical resistant polyethylene
Removable decking standard
|
|
|
|
|
 |
|
Drum Tiers - Increases storage space
Designed to help maximize floor space in a safe and
convenient manner
Lightweight design utilizes one person operation
Handles steel drums up to five units high
Tabs keep drums aligned when stacked
Drums not included.
|
|
|
|
|
 |
|
Drum Transport and Stacking Stand - Transport 30 or 55-gallon fiber, plastic or steel drums with the use of
a pallet truck or fork truck. A special understructure with fork tine lock
tabs minimizes the possibility of the drum accidentally tipping while
being transported with a fork truck. The Drum Stand also allows for
drum stacking for compact storage of drums up to three high (empty
stands are nestable and stackable). Capacity is 1,500 pounds. Stand
is painted with a powder coat safety yellow paint finish.
**Pallet jack and drums not included.
|
|
|
|
|
 |
|
Fork Truck Drum Carrier/Rotators - Easily transport and rotate 55 gallon steel drums using a fork truck
15 foot long chain allows drum to be rotated up to 360° from fork truck operator's seat
Fork pockets measure 7 1/2" wide x 2 1/2" high usable
Safety chain secures unit to fork truck
Bung Nut Wrench included for opening and closing drums
* Drums must be filled to rotate at rated capacity
|
|
|
|
|
 |
|
Lo-Profile Drum Caddies With Bung Wrench Handle - Reduce injuries caused by manually lifting and moving drums
Transports (1) 55 or 30 gallon drum or (2) 5 gallon pails
Unit rolls easily on two 6" x 2" rigid wheels and one 3" x 1" swivel
caster
Removable handle doubles as a bung wrench and seal remover
Cradle height is 1/2"
Inside cradle diameter is 23 1/2"
Steel construction
Yellow paint finish
To use:
Align unit in front of drum, remove handle, and grip drum with the
handle
Tip drum up while guiding the caddy base under the drum
Re-attach handle and transport drum to desired location
Drums not included.
|
|
|
|
|
 |
|
Poly Drum Cradles - Dispense drum contents into smaller containers and avoid messy
clean-ups. This horizontal drum cradle collection system captures
all spills and leaks and stores them in the interior of the hollow
cradle for reuse or safe, clean disposal.
2" NPT drain plug standard
Fork entry measure 6" x 3"
Made from 100% virgin polyethylene
Model VE-VCRD-P features:
Retractable handles for tilting and positioning drums
Includes a round contoured lower back for easier rotation
of drums from horizontal to vertical position
6" x 2" polyolefin wheels
Drums not included.
|
|
|
|
|
 |
|
Revolving Drum Carts - These drum carts are designed to rotate 55 gallon drums from the
vertical position to the horizontal position so their contents may be
emptied. Simple one-person operation. Steel construction. Powder
coat finish.
Equipped with rollers for mixing
Includes a built in drip pan to provide a clean safe work floor
Rolls on two 3" swivel casters and two 5" rigid casters
Drums not included.
|
|
|
|
|
 |
|
Pallet Truck for 55 Gallon Drums - Easily secure and lift drum by actuating pump handle.
Lifts drum 4" off ground
Steering wheels 8"x2" nylon
Load wheels 1"x3" nylon
Ships unassembled (must attach handle)
|
|
|
|
|
 |
|
"Drum King" Drum Handling Truck - The Drum King incorporates features developed over many years
of experience. It's design enables one man to quickly, easily and
safely move drums weighing up to 1200 lbs. Spring loaded swing
axle assembly keeps truck in upright position when not in use.
Lifting toes are replaceable. 1" cold-rolled steel axle. 10"x2 1/2"
roller bearing.
|
|
|
|
|
 |
|
Stackable Drum Racks - These steel stackable drum racks have 2-way fork truck access. Not
recommended for stacking more than 2 racks high. All steel construction
with a 1/4" formed steel cradles. Bolt together assembly with hardware
included.
Drums not included.
|
|
|
|
|
 |
|
Drum N' Barrel Safety Truck - Rear wheel assembly makes for even weight distribution and easy,
safe handling for the operator. Handle design allows for easy loading
and unloading of drums on and off pallets. Double frame of 1" O.D.
14-gauge steel tube. Spring loaded kick stand holds truck in vertical
position.
|
|
|
|
|
 |
|
Drum 'N Barrel Truck - Features a spring loaded device that helps ease the drum onto
the wedge toes, the truck automatically returns to a vertical
position when not in use. A foot rest helps operator to position
truck under drum and ease breakover, and keeps loads from
falling back on operator. Equipped with a 7/8" cold rolled steel
axle and 10"x2 1/2" molded-on rubber-tired roller bearing wheels.
|
|
|
|
|
 |
|
Drum Truck for 85 Gallon Overpacks -
Long belt allows truck to handle all poly drums.
Recommended primarily for the handling of overpacks.
Replaceable "feet" and belt.
Floating axle reduces effort required to break over
and balance load.
23.5" depth.
Industrial heavy duty 1" structural pipe frames.
All joints are double welded.
Choose wheel type (listed below).
|
|
|
|
|
 |
|
Multi-Function Drum Truck - Allows you to move drums on four wheels and acts as a
drum cradle for storage or dispensing.
Flame clearance for dispensing into 5 gallon pails.
Polyolefin rollers allow for easy faucet positioning of drums.
Rear axle allows for loading.
Kickstand
16.5" drain height
10" x 2.5" moldon rubber wheels
|
|
|
|
|
 |
|
Powered Aluminum Drum Handling Truck - Takes the strain out of moving heavy drums.
Variable speed forward and reverse
Circuit breaker protection
Magnetic clutch allows drive wheels to be free wheeling
Wheel brake bands activated by hand lever
Nose prongs reversible for use with 30 and 50 gallon drums
Front wheels: 10" moldon rubber, aluminum hub
Rear wheels: 6" polyurethane
1/4 HP, 24 volt motor
Short chime hook
|
