|
Jacks, Lifts & Tilters
|
 |
Jacks, Lifts & Tilters - Electric Office Lift, Full Featured Pallet Trucks, Efficiency Master Tilt Tables, Electric Hydraulic Scissor Lift Tables, Tote Lifters, DC Powered and Manual Scissor Carts, - Industrial Lift Equipment - Variety of Industrial Lift Equipment - our line of jacks includes pallet jacks for most commercial and industrial needs. These industrial lift equipment are available in a range of capacities and a choice of fork widths and heights.we carry a large line of industrial lifts. From hoists, fork lift stackers and accessories, hydraulic lift tables, hydraulic post tables, electric worker platforms, load lifter handtrucks, mechanical post tables, transport lifts, scissor lifts, and more. Our line of industrial tilters includes bench top tilters, ergonomic tilt tables and work aids, and hydraulic lift and tilt elevating carts.
| |
  |
|
55 Pallet Truck -
The Eagle55 has a one piece, cast iron design pump with a 7 year warranty offers long life and easy servicing.
Features:
Hydraulic Pump:
Quality German design with foot release pedal for ease of operation
Special lowering valve allowing a controlled rate of decent and an overload bypass
valve
Requires 10 strokes to raise the forks to maximum lift
|
|
|
|
|
 |
|
Electric Office Lift - Features:
Ideal for narrow aisles
Great for offices
Lightweight, but sturdy
Sealed battery and automatic charger built in
Remote up and down pendant
Specifications:
5" lowered height
66" raised height
220 lbs. capacity
146 lb. unit weight
18" x 23" platform size
2.75" x 1.25" hard rubber load wheels
9.25" load center
Ships from Pennsylvania
|
|
|
|
|
 |
|
All Terrain Pallet Jack - Lightweight yet strong tubular frame design
Inside Straddle is 50"
Outside Straddle is 64"
Handles evenly distributed loads up to 2,000 lbs.
2,000 lb. capacity at 12" horizontal load center and 1,500 lbs.
at 15" horizontal load center
Large wheels allow for movement over most surfaces
Use at construction sites, gravel pits and nurseries
16" front pneumatic tires and 10" pneumatic steering wheels
Individual forks are 4"Wx2"H
Easy to operate with three position handle, UP, DOWN, and
NEUTRAL
Optional tow bar package allows for towing by an ATV or
small utility tractor
|
|
|
|
|
 |
|
Full Featured Pallet Trucks - Includes two articulating steering wheels and two front load rollers
Ergonomic design requires only 75 lbs. of pulling force when fully loaded
Steering wheels include bearing dust covers for added life
Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit
Reinforced triple-formed steel forks provide twice the strength of standard single-formed forks
Forks are 6 3/4" wide each
Equipped with internally mounted solid steel adjustable push rods
Spring loaded handle automatically returns to vertical position when not in use
Hydraulic pump design facilitates easy-access seal replacement
Chrome-plated hydraulic pump piston for long seal life
Fork Service Range: 2 7/8" to 7 3/4"
Wheels: 6 degree articulating Poly-on-Steel
|
|
|
|
|
 |
|
Standard Pallet Truck - Economical - User Friendly - Low Maintenance - Quality Built - Powder Coat Finish
Proven ergonomic design has been time-tested for providing years of reliable service. An economical way for one person to move heavy pallet loads without the use of a fork truck. Ergonomic design requires only 75 lbs. of pulling force when fully loaded. Spring loaded loop handle automatically returns to vertical position when not in use. Chrome-plated hydraulic pump piston for long seal life.
Fork Service Range: 2 7/8" to 7 3/4"
|
|
|
|
|
 |
|
5,500 Lb. Capacity Adjustable Fork Pallet Jack - Our Best - Deluxe Series Pallet Trucks have over 18 years of proven performance in the U.S. market. New 5 year pump warranty makes this Deluxe Series a great value.
Adjustable fork can be set from 21" to 27" or anywhere in between
Pump overload bypass
Rubber coated handle
Exit rollers
200° steering angle
8 gauge 6" wide reinforced forks
Tapered fork tips for easier pallet entry
3" wide moldon polyurethane load wheels
7" moldon polyurethane steering wheel
7.75" raised height
3" lowered height
6" wide forks
|
|
|
|
|
 |
|
Stainless Steel Pallet Truck for Food Industry - All parts made of stainless steel
For use in food industry and areas where
corrosive solutions are used
1 year pump warranty
6 1/4" wide forks
7" nylon steering wheels
3" nylon load wheels
|
|
|
|
|
 |
|
Side Winder Pallet Truck - Move long loads down narrow aisles
Capacity is 3,000 lbs.
Moves forward, backward, left and right
To use:
Place the forks into the pallet
Elevate to approximately 7"
Rotate handle and lock detent into place
Second set of rollers are now actuated
Push the truck perpendicular to the traditional direction
|
|
|
|
|
 |
|
Bench Top Tilters - Bench Top Tilters increase efficiency and help reduce fatigue and potential injury by placing work at a better ergonomic angle. Loads up to 1000 lbs. may be tilted 0° to 45°. Heavy-duty steel tilters can be attached to most industrial table tops, workbenches and mobile lift tables of sufficient load capacity and surface size. Pendant hand control with UP and DOWN push buttons is located on an 8 foot cord, maximizing operator convenience. Flat base plate with slotted holes for installation. Tilting top is powder coated silver. Base is paintes royal blue
|
|
|
|
|
 |
|
Efficiency Master Tilt Tables - Efficiency Master Tilt Tables tilt pallets, crates, boxes or baskets 45 degrees to facilitate easy container loading or unloading. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2 HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208-230/460V 3 phase. A rainproof 24V push button hand control is standard.
|
|
|
|
|
 |
|
Electric Hydraulic Scissor Lift Tables - Standard Features:
Patented pinch point perimeter guards for OSHA Compliance
Fused 24 volt hand held pendant control on 8 foot cord
Adjustable upper travel 24V limit switch
Internal brass velocity fuse
2HP 56 frame electric motor
New improved pressure plated pump and manifold system
New improved robust heavy capacity tables
Displacement style hydraulic cylinder
State -of-the-Art lifetime lubricated bearings
Hinged maintenance pump
3000 psi hydraulic component rating
460 voltage / 3 phase
Other power options available at no additional charge - please inquire.
7" lowered height, 43" raised height
|
|
|
|
|
 |
|
Ground Scissor Lift Tables - Designed for use when powered fork trucks are not available
Pallets can be loaded onto table with pallet trucks and raised to an ergonomic working height
Front side electric toe guard to protect pinch points during lowering of table
Velocity fuse to maintain platform height regardless of hydraulic pressure
Foot control
Maintenance prop
Upper travel limit switch to stop table at maximum height reducing motor wear
2 HP, 208-230/460V, 3-phase, remote 60 Hz totally enclosed motor
Motor is remote and can be located up to 8 feet away from table
3000 psi hydraulic components rating
|
|
|
|
|
 |
|
"Linearizer" Electric Worker Platform - The "Linearizer" Electric Worker Platforms are designed to raise or lower a worker to optimum working height for maximum productivity with minimum risk of back injury and fatigue. Typical applications include packaging stations, heavy machinery such as drill presses. lathes and saws. individual work cells or work areas where height is a problem. Ideal use in a cleanroom environment since the lifting source is an electric linear actuator. An ergonomic anti-fatigue mat is included on the platform. Two rigid casters on the back side are used to facilitate ease of movement.
Unit is operated with a 24V pendant hand held push button control on an 8' cord. The actuator power supply may be either 110V AC or 24V DC. AC power units plugs into any 100V grounded outlet. DC power units include battery with built-in charger.
|
|
|
|
|
 |
|
Mobile Tilting Work Table - The "Linearizer" Electric Worker Platforms are designed to raise or lower a worker to optimum working height for maximum productivity with minimum risk of back injury and fatigue. Typical applications include packaging stations, heavy machinery such as drill presses. lathes and saws. individual work cells or work areas where height is a problem. Ideal use in a cleanroom environment since the lifting source is an electric linear actuator. An ergonomic anti-fatigue mat is included on the platform. Two rigid casters on the back side are used to facilitate ease of movement.
Unit is operated with a 24V pendant hand held push button control on an 8' cord. The actuator power supply may be either 110V AC or 24V DC.
|
|
|
|
|
 |
|
Posi-Crank® Worker Platform - Elevate the Worker or Elevate the Job
The Posi-Crank® ergonomic work station is an economical variable height worker positioner. With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank® include minimizing the risk of cumulative trama injuries, back injuries and fatigue, while maximizing efficiency and operator morale.
The Posi-Crank® incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed maximizing the operating space. The deck is constructed of steel treadplate for strength and better traction.
Maximum Capacity is 500 lbs.
Lowered Height is 3"
Raised Height is 19"
|
|
|
|
|
 |
|
2000 - 6000 lb. Capacities Foot Pump Hydraulic Lift Tables - 2 rigid and 2 swivel phenolic resin roller bearing casters
WE-LTL models feature 4" casters and a 3/8" lift per stroke
WE-LT models feature 6" casters
4 support posts and push handle
Foot operated floor lock
|
|
|
|
|
 |
|
Post Tables - Foot operated Hydraulic Lift Post Tables are built for heavy duty shop use such as lifting dies and castings, moving machine parts, positioning welder's work, leveling feed material for pump presses, conveyors and press brakes, and similar material handling jobs. Posts are telescoping to help stabilize and support loads during operation.
Units feature a two-speed foot pump for maximum operator convenience. All foot pumps include a down speed control valve for safe platform lowering.
Units include two rigid and two swivel casters with wheel brakes.
|
|
|
|
|
 |
|
Power Lift Jib Cranes - Designed for material handling applications on docks, in warehouses,
or in truck beds
Choose either intermittent or continuous duty winches with reaches
from 3' to 9'
Available in both AC and DC power
Meet or exceed ANSI and OSHA specifications
|
|
|
|
|
 |
|
Tote Lifters - Designed to lift open bottom skids, boxes, and baskets.
Two operations available: hand pump and 12V DC power with
rocker switch to raise or lower
Hand pump design features an ergonomic pump handle with 2
lifting speeds to accommodate for light or heavy loads
Side stabilizers provide balance to the unit when the load is
lifted
Suffix "SS" denotes stainless steel
Stainless steel units feature nylon wheels
Optional battery chargers are available (sold separately)
Options are factory installed
Instructional video or DVD available
|
|
|
|
|
 |
|
Tote-A-Loads - Designed to lift open bottom skids, boxes, and baskets.
Manually operated lift is easy to operate
The foot pump operated lift travels approximately 1/2" per stroke
To lower unit simply squeeze the bicycle style grip located on the
white push bar
The battery operated lift is ideal for positioning products at
workstation height for increased productivity
Up/Down lever control is conveniently located on power unit
DC powered units include on-board charger
Polyurethane swivel casters with brake are standard on all units
|
|
|
|
|
 |
|
Pallet Master/Servers - Enables one person to easily move fully loaded pallets without the use
of a fork truck. Unique straddle design works well with pallets and skids
with and without an understructure.
Ideal for loading and unloading semi-trailers
12V DC power standard with an on-board charger
Push buttons to raise and lower lift are located on the power
unit
Hand control on coil cord standard
Key-operated ON/OFF control for better security is built into
the power unit
All welded steel construction
Lowered height is 3"
Unit moves easily with two rigid and two swivel 8" phenolic
casters
Floor lock is standard
|
|
|
|
|
 |
|
Counter-Balanced Stackers - Move small loads from one place to another without the need for
oversized fork truck equipment. Counterbalance design allows
the operator complete access to three sides of the load.
Open front enables the forks to be next to the workstation for
easy loading and unloading
Standard 12V DC power lift with on-board charger
Includes counterbalance
Push buttons to raise and lower lift are located on power unit
|
|
|
|
|
 |
|
Hefti-Lifts - User-friendly portable hydraulic lifts provide reliable, powerful lifting
when moving and positioning loads. Ideal for commerical or industrial
use.
Includes removable chrome platform for operations requiring forks
Manual hydraulic foot pump yields 3/4" of platform travel per stroke
Nonslip chain is used for accurate positioning
Unit rolls easily on two rigid and two swivel polyurethane casters
and includes a foot operated brake
All welded steel construction with chrome platform and uprights
|
|
|
|
|
 |
|
Stacker with Powered Drive and Powered Lift - Transport loads throughtout warehouse facilities quickly
and with less effort. This powered drive stacker operates
smoothly on concrete floors. Individual forks are 6" wide
|
|
|
|
|
 |
|
Hydraulic Fork Stackers - Fork Stacker Features:
1" thick x 3" wide x 25" long forks
Adjustable span up to 25"
15" load center
25.5" overall width - 40" depth
Base leg span: 15" inside - 21" outside
Forks lower to ground
1000 lb. capacity
|
|
|
|
|
 |
|
Steel Frame Pedalifts 2-Wheeled Winch Models - Steel Frame Pedalifts
2-Wheeled Winch Models
Auto-brake designed winch raises and lowers by turning handle
- no catches to lock or release required
Low maintenance design
Front of platform touches the ground on two wheeled model
Wheel lock standard
54" Lifts are 60.5" O.A.H.
40" Lifts are 48.5" O.A.H.
750 lb. capacity
Choose Platform or Fork Model
|
|
|
|
|
 |
|
Stacker with Powered Lift - Raise and lower loads quickly and easily with this highly
efficient, durable lift.
Manual push operation with battery powered lift
Powered with a 24V battery, includes charger
135 amp battery
Ships from Indiana
|
|
|
|
|
 |
|
Basket & Skid Stackers - Transport open bottom pallets, skids, and crates with ease.
Features an 18" horizontal load center and overall fork
width of 26"
Available in 12V DC power(with on-board charger), AC
power, or Air/Oil power
Move the unit around easily on its 8"x3" swivel phenolic
rear casters
Handle height is 36"
Push buttons to raise and lower 12V DC lift are located
on the power unit
Hand control on coil cord standard
Key-operated ON/OFF control for better security is built
into the 12V DC power unit
|
|
|
|
|
 |
|
Hydraulic & Winch Stackers - Safe ergonomic alternative to fork trucks at a fraction of the cost.
Hydraulic Unit
Engineered for smooth operation and outstanding durability
Lifts and transports skids, bales, and baskets
Load/unload trucks, stock shelves, handle dies, molds, or pallets
Perfect for maneuvering in tight or congested areas
Complete with on-board charger
24" horizontal load center
Adjustable straddle legs (34" to 50" I.D.) and adjustable forks 6"
to 24" (O.D.)
6"swivel phenolic rear casters and 4" phenolic front wheels are
standard
Compact Winch Unit
Less expensive ergonomic alternative for lifting pallets of all
sizes
Compact unit is perfect for loading/unloading trucks where
docks are not available
Includes safety cage
|
|
|
|
|
 |
|
Manual Work Positioners - Designed to take the strain out of any lifting job. Ideal for use in
narrow aisles and confined spaces.
Platform height is adjustable with a manual hand winch
Auto brake system allows for controlled lowering
Quick change attachments available
|
|
|
|
|
 |
|
Versatile Quicklift - An economical alternative DC powered lift. Ideal for light industrial
or commercial applications.
Durable belt over pulley design
Great versatility and convenience
Two 3" swivel casters on front, two 4" swivel casters on back
White high density (HDPE) plastic platform is scratch resistant,
easy to clean, and retains attractive appearance
Platform travels 57" in just 18 seconds
Top wheels facilitate loading into a pick-up or van
Tool tray and remote battery charger is standard
|
|
|
|
|
 |
|
DC Powered Quick Lifts - Quiet, lightweight units transport and position loads quickly with just the
push of a button.
Battery operated
High density polyethylene platform makes these lifts ideal for clean
room operations
9" horizontal load center
Low profile design for maneuvering in narrow aisles and confined
spaces
Poly casters: two swivel and two swivel-locking are standard on
all VE-88 and VE-100 units
Two rigid front wheels and two swivel rear wheels with locks are
standard on VE-400 units
24V battery and 110V AC charger
Powder coat blue finish
|
|
|
|
|
 |
|
Hand Winch Lift Trucks - Compact lift trucks are designed to lift material to and from shelves,
move office equipment, and install ceiling/wall appliances.
Constructed of durable steel-and-aluminum
Rugged 4" wide by 1 3/4" thick steel forks measure 20 1/2" wide
by 22" long overall
Operated by a hand-crank winch
|
|
|
|
|
 |
|
Portable Worksite Lift - Ideal for positioning loads where they are needed, for storage in tight places,
and for transportation in the back of a vehicle.
Includes a lifting platform and an overhead lifting boom for unique
applications
Manual hand crank cable winch with hook
Portability is easy with 8"x2" phenolic swivel casters and push
handle
Unit knocks-down into two pieces - base and upright
Welded steel construction with painted finish
Capacity is 500 lbs.
Distance between front outriggers is 28"
|
|
|
|
|
 |
|
Lite Load Lifts - Lift and transport loads from delivery trucks to docks or use to inventory
items on storage systems.
Available in steel or aluminum construction
Units roll smoothly on 6"x2" mold-on-rubber rear wheels with 2" semi
steel front wheels
Two rollers are located on the handle to ease loading into delivery trucks
Platform lifts approximately 1" per winch rotation or foot pump stroke
Horizontal center load is 10"
Four swivel wheels and floor lock are standard on units with the
suffix (-4FSL)
|
|
|
|
|
 |
|
Low Profile Lite Load Lifts - Lift and transport loads from delivery trucks to docks or use to inventory
items on storage systems.
Available in steel or aluminum construction
Units roll smoothly on 6"x2" mold-on-rubber rear wheels with 2" semi
steel front wheels
Two rollers are located on the handle to ease loading into delivery
trucks
Platform lifts approoximately 1" per winch rotation or foot pump stroke
Horizontal center load is 10"
Deck height of 1/4" with 2" high side lips
|
|
|
|
|
 |
|
Counter-Balanced Lite Load Lift - Lift and transport loads from delivery trucks to docks or use to inventory
items on storage systems.
Steel construction
Includes weight counter-balance
Units roll smoothly on 6"x2" mold-on-rubber rear wheels with 2" semi
steel front wheels
|
|
|
|
|
 |
|
Fully Portable Aluminum Load Lifter - Ideal for the traveling salesperson as well as service and installation
crews.
Lightweight, yet safely lifts and positions up to 220lbs.
Stores easily in a truck or a car
Rolls smoothly on 4"x2 1/2" rear swivel casters and 3"x1" front
wheels
Overall size of the unit is 30 3/4"Lx22 3/4"Wx55"H
|
|
|
|
|
 |
|
Combination Hand Pump and Electric Stackers - An economical alternative DC powered lift stacker.
Ideal for maintenance and commercial applications
1500 watt motor, 40 amp battery and 10 amp charger
Individual forks are 6" wide
For use with skids only
|
|
|
|
|
 |
|
Hydra Carts - Transport loads in the lowered position and maneuver work materials
without the use of a fork truck.
Safe and easy one person handling of loads up to 1000 lbs.
Efficient way to unload heavy objects from semi trailers
Rugged steel construction for years of service
|
|
|
|
|
 |
|
Portable Hand Winch Lifter - Easy to maneuver with its 4"x1" wheels, two rigid, two locking
swivel
Removable platform for increased versatility
Platform size is 20" wide by 20" long
Handle length on the hand crank may be adjusted to increase
or decrease lifting/lowering speeds
|
|
|
|
|
 |
|
Adjustable Box Stacker - Specially designed for transporting, stacking, and lifting plastic crates
and similar types of containers.
Compact and lightweight
Both fork width and box clamps are adjustable to fit different size
boxes and containers
|
|
|
|
|
 |
|
Lift & Tilt Carts with Sequence Select - Model VE-CART-500-LT
Unique design which allows user to raise and tilt materials to an
ergonomic position for better posture and operator comfort
Manual hydraulic foot pump controls the platform lift, tilt, and lower
Manual selector valve is used to control the lift/lower sequence
independently from the tilt sequence
Hinged platform includes a 6 1/2" high retaining lip
Cart is portable with two rigid and two swivel 5" poly-on-steel
casters
Model VE-CART-400-LT and Model VE-CART-600-LT
Elevated by means of a foot actuated hydraulic cylinder
As the table is raised, it simultaneously tilts to an angle of 45° at
full elevation
Built-in retaining lips keeps containers in place
|
|
|
|
|
 |
|
DC Powered and Manual Scissor Carts - Tables provide unparalleled ergonomic support in lifting, palletizing,
loading, and unloading applications. Carts are raised or lowered
with either a 12V DC powered motor or a manual two-speed foot
pump.
Units roll smoothly with (2) rigid and (2) swivel 4"x2" phenolic
casters with brakes
Push handle is removable
Internal DC powered electric motor and 12V battery is included
on DC units
Electric motor is rated at 1600 watts
Built-in battery charger is included (operated on 115V AC power)
Push buttons to raise and lower lift are located on the power unit
Hand control on coil cord is also standard
Key-operated ON/OFF control for better security is built into the
power unit
|
|
|
|
|
 |
|
Traction Drive Electric Hydraulic Elevating Carts - Makes maneuvering heavy loads virtually effortless. A twist of the
throttle with reverse facilitates the maneuverability of this cart.
Push of a button will raise and lower the platform
24V DC battery operated with an on-board battery charger and
maintenance free batteries
Standard features include powered front drive wheels, twist style
throttle with reverse, and fully programmable motor controller
|
|
|
|
|
 |
|
Counter-Balanced Pallet Master/Servers - Move pallets and skids from one workstation to another.
Available in 12V DC, Air/Oil or AC power
18" horizontal load center and adjustable forks from 8" to 28"
Standard 12V DC power lift with on-board charger
Move the unit around easily on its 8"x3" phenolic casters
|
|
|
|
|
 |
|
Fully Powered Electric Pallet Trucks - Fully powered pallet truck for easy and quick operation.
Fingertip raise and lower buttons
Easy-to-operate throttle for forward and reverse direction
Throttle offers infinite forward and reverse speeds
Safety features include a horn and belly reverse button
Units run off 24V batteries with battery charger standard
3000 lbs. capacity models use two 12V batteries with 70Ah rating
4500 lbs. capacity models use four 12V batteries with 180Ah rating
Units will typically achieve a minimum of eight hours of service
|
|
|
|
|
 |
|
Hydraulic Elevating Carts - Portable ergonomic elevating carts minimize worker bending and lifting. Materials can be easily loaded onto cart from table, lowered to safe transporting heights, and raised to unload at destination.
Foot pump includes a soft-lowering down valve
Move easily on four polyurethane casters
|
